Steel pipe hardening and tempering equipment,steel pipe hardening and tempering furnace,steel pipe heat treatment furnace manufactured by Forever Furnace from China is used for steel plant.With 16 years of experience in the field of induction heating equipment,our experienced engineer will give you cost-effective heat treatment solutions according to your material size and processing requirement.
High heating efficiency of Forever steel pipe hardening and tempering equipment
In this system,we use thyristor medium frequency induction heating power supply for the low temperature range and the IGBT super-audio frequency power will work when the heating temperature reaches to the curie temperature.That make sure the heating efficiency is over 80%.
The configurations and features of steel pipe hardening and tempering equipment:
1.IF power supply:
This line is equipped with thyristor IF power supply and IGBT super-audio frequency power supply. The equipment has reasonable wiring, strict assembly process and the perfect protection system.The power factor is high and easy operation and maintenance.
2.Feeding System:
This system consists of feeding frame,variable frequency motor,air cylinder,steel roller and so on.There is high temperature insulation material between steel roller and inner sleeve.The inner sleeve connects with shaft key.It is more convenient to disassemble and protect the steel bar from surface burning by contacting with steel roller during transmitting.
3.Induction heater:
Induction heater has four sets of inductors.The length is 1m each one.
4.The fast switch of induction heaters:
a)Four sets of inductors switch:Lifting, sliding type positioning installation as a whole.quick change connector for water supply device and stainless steel king-bolt connection for electricity.
b)Single inductor switch:quick change connector for water supply device and stainless steel king-bolt connection for electricity.
c)Inductor copper pipe:Electrolytic copper(T2 red copper) as per the international standard
5.Water cooling system
6.Steel pipe hardening and tempering line can meet the requirement of three shifts for 24 hours with stable running.
7.There is no spark during steel pipe transmission.
If you need to know more about steel pipe hardening and tempering furnace,please send me the email.
Contact person: Tom Wang
Email:tom@foreverfurnace.com
Phone: 0086-13303078975(whatsapp, wechat,line)
www.foreverfurnace.com www.hy-inductionheater.com www.hy-inductionheating.com
